I have launched a Facebook page @CeramicsByJosephLenartowicz so you can interact with me there.
Of course you can always email me as well, whichever you prefer.
Because of Covid I’m missing annual pilgrimage to Somerset to do some wood firing. Normally my pots are fired in an electric kiln, but wood firing is something special – not to be confused with low temperature “smoke firing” which produces black smokey patterns but is not at all food safe, high temperature wood firing goes to stoneware temperatures typically around 1280-1300°C.
Wood fired glazes can produce superb depth and complexity especially when the kiln is deliberately starved of oxygen at high temperature to create chemical “reduction”. Pots often show mottling where ash from the firing lands on them as it passes through the kiln and this can be tremendously variable depending on where the pots are staked in relation to the how the hot gasses from the firing flow past. This variability and unpredictability helps create the uniqueness of every pot.
Naked unglazed clay turns a wonderful toasty colour and ash landing on it melts forming a “natural” glaze in-situ as can be seen on the bare outer surface of this bowl.
I’ve been working on some new glazes and these two have worked really nicely on this little dish (7cm diameter). Both the grey and the green use a titanium mineral called Rutile. Green glazes often use copper or chromium which I wanted to avoid. Here the green is created by the interaction of the rutile with a little cobalt (which usually comes out blue). I love the brilliance of the lighter green against the deeper tones.
For the technically minded, the green is sensitive to the underlying base glaze chemistry. The grey here is my standard magnesium silky matt base glaze with added rutile. Using cobalt with this would produce blue instead of green. To get the green I’ve had to use a different base glaze.
I still have more testing to do on this glaze before I’m happy with it – although I love the colours it’s very powdery and doesn’t apply well to unfired pots so I have to do more work on the physical chemistry to make it a better fit for my raw glazing processes. Oh well, back to the test tiles…
There’s a nice article published in the April edition of Cumbria Magazine (Dalesman Publishing) about Ulverston Potters Collective.
This was going to be a lead in to this year’s “Fired Up Furness” exhibition but sadly of course that has had to be cancelled. We’ll be back to do it again so do look out for us this time next year.
An interesting article in the Northern Potters Association bulletin this month about using less energy in firings. It suggests, amongst a range of other measures, considering dispensing with biscuit firings by raw glazing. This is exactly what I do.
Along with some other potters I do just one firing, applying glaze to the “raw” unfired clay (hence the term “raw glazing”). This is an uncommon technique as the majority nowadays do two firings. The first firing, called the biscuit or bisque firing” is to harden the clay to make a solid and consistent surface to work on when applying glaze and decoration. This is then fired a second time to melt the glaze.
Single firing is actually a much older technique going back to antiquity and probably how most pottery was fired through human history. However single-firing is not without it’s challenges – which is why the second firing was introduced – and so it does require a carefully selected approach to the way glazes are formulated and applied. This for me is where the fun and interest lie!
How much energy does it save? The short answer is, as with all things in ceramics, it depends… Single-firing omits the bisque firing, but as this would typically be a relatively low temperature firing, and often the single firing may need to be slower to compensate, in the end the savings are not quite as clear cut – perhaps nearer to 35% saving than 50%. There may also be other savings that can be made by changing clays, firing temperatures and timings etc. However single-firing is still a winner for the environment and your budget too.
It’s always exciting and nerve-wracking in equal measures to get commissions. Here’s an example of some recent work – four unique small (10cm) dishes and, in a follow-up order, two noodle bowls to match.
Of course a key part is working out what your client wanted and how to achieve it. However the nerve-wracking part is balancing the variability of the glazing effects and yet controlling enough elements to keep a matching set. Artistically speaking, how far can one explore a theme without loosing the theme? Then there are the unknowns introduced by the kiln gods on firing day and the long wait for it to cool so you can finally see the results.
Another nail-biting moment is presenting the work to the client and hoping they’ll like it. A repeat order means you must have done something right, but even then you go through the same emotions.
I’m more than happy to take commissions, do contact me and discuss your ideas.
A very successful first day yesterday at Fired Up Furness. Still open Today (Sunday 5th May) showing 11 local potters and ceramicists.
Hopefully this will put Ulverston and the Furness area on the ceramics map. We’re already thinking we could run it again next year.
1 County Mews
LA12 7AQ Ulverston
Here are some lovely Ikebana vases. They are made from stoneware clay, thrown and then altered by hand so they have unique asymmetries. They are individually glazed and single-fired to 1260 degrees centigrade.
Perfect for stylish and dramatic flower arrangements.
I’ll be exhibiting some of these vases at Fired Up Furness in Ulverston on 4th & 5th of May. https://www.facebook.com/firedupfurness/